Caseware Legal
The Caseware Legal page provides centralized access to Caseware’s legal policies, agreements, and compliance resources. Explore important information related to privacy, security, AI, accessibility, and product usage in one place.

Caseware Training Terms and Conditions (Global)
Last Updated: September 9, 2026
These Caseware Training Terms and Conditions ("Training Terms") govern the provision of training services by Caseware International Inc. or the applicable Caseware entity listed on an Order Form or SOW ("Caseware", "we", "us"). These Training Terms form part of, and are incorporated by reference into, any applicable master product and services agreement (“MPSA”), Order Form, Invoice, or online registration under which training services are purchased by you (“Customer”). Capitalized terms not otherwise defined herein shall have the meaning given to them in the MPSA.
These Training Terms apply globally to all forms of training services provided by Caseware, including but not limited to instructor-led training (virtual or in-person) or on-demand e-training delivered through the Caseware Academy.
1. Training Formats
Training may be delivered in standard or customized formats. Standard training follows published descriptions and schedules. Customized training may require a separate written agreement or Statement of Work, which shall prevail over these Training Terms. Caseware’s current training services are as follows:
(a) Self-Serve E-Training Courses. Online training courses, available for viewing on demand.
(b) Virtual Instructor-Led Training (“VILT”). VILTs are e-seminars conducted at a pre-determined date and time using a 3rd party online webinar service. The cost of each session is a one-off set fee per webinar. There is no limit to the number of people who can view the webinar per connection. The webinars usually run for approximately two to three hours.
(c) Public In-Person or Virtual Instructor-Led Training (“Public ILT”). Public ILT courses may be conducted in-person or virtually. For in-person training, Caseware trainers organise a conference venue and conduct training for up to ten (10) individuals by invitation only. The duration of each course will be provided at time of registration. No print materials will be provided for virtual courses. The cost of such training is a set fee per participant. For training provided as part of a CwX event, please also see our event terms available online at https://www.caseware.com/ca/cwx-conference.
(d) Private In-Person or Virtual Instructor-Led Training (“Private ILT”): Private ILT may be conducted in-person or virtually. For in-person training, Caseware trainers attend Customer’s workplace (or a training venue which Customer has arranged at Customer’s expense). The duration of each course will be mutually agreed in advance. Unless otherwise agreed in writing, there is a maximum limit of 10 people who can attend, and the exact number of attendees must be provided in advance to ensure access to printed materials/workbooks (if any). No print materials will be provided for virtual courses. The cost of each course is a set fee plus out of pocket expenses for travel, accommodation and workbooks/stationery.
2. Registration and Payment
(a) Unless otherwise set out in an Order Form or SOW, Customer must register and pay in advance for any training course, and participants may attend training only upon receipt of confirmation of registration from Caseware.
(b) Where applicable, registration forms with payment must be provided to Caseware at least 4 days prior to the commencement date of the applicable training course. Applications for registration sent without payment will not be accepted and Caseware cannot confirm a participant’s reservation until payment is made.
(c) As soon as a registration is accepted, and where applicable, Caseware may commence arrangements for the trainers’ travel and accommodation and may incur other out-of-pocket expenses. Customer is liable for any such costs incurred by Caseware due to cancellation or rescheduling of the course by Customer. If cancelled, Caseware will issue Customer an invoice which is payable immediately upon receipt. If rescheduled, the additional costs will be added to the invoice for out-of-pocket expenses to be raised upon completion of the training course.
(d) Customer shall pay Caseware all fees, amounts, and charges (the "Fees") in relation to the provision of the training services. All Fees are exclusive of applicable taxes.
(e) In addition to the Fees payable, payment by credit card is subject to a credit card surcharge (currently 1.2%).
3. Cancellations and Rescheduling
(a) Self-Serve E-Training: Once registration is complete, Self-Serve E-Training courses are non-cancellable and non-refundable.
(b) VILT: Once registration is complete, VILT courses are non-refundable and may only be cancelled with Caseware’s prior written consent.
(c) Public ILT: Any request for cancellation must be provided to Caseware in writing. If a cancellation is made 2 weeks or more prior to the start of a course, all course fees will be refunded. If withdrawal is less than 2 weeks prior to the start of the course, no refund will be provided.
(d) Private ILT: Any request for cancellation must be provided to Caseware in writing. If a cancellation is made 30 days or more prior to the start of a course, all course fees will be refunded, except for: (i) any costs related to external training resources that Caseware has engaged to provide the training, and (ii) any other out-of-pocket expenses incurred by Caseware in connection with the applicable training course. If cancellation is less than 30 days prior to the start of the course, no refund will be provided.
(e) Transfers: Unless otherwise agreed by Caseware in writing, all training courses and Fees paid may not be transferred to another attendee or third party.
(f) Cancellation by Caseware: Caseware reserves the right to cancel any training course at any time. In such event, Caseware will at its sole option: (i) reschedule the training course at a mutually agreed time and date; or (ii) refund the fees in full.
Please Note: In certain jurisdictions, individual consumers may have a statutory right to withdraw from this registration within 14 days, without giving a reason, unless such right is waived. If you meet the applicable criteria and have not waived the right to withdraw, you may exercise this right at any time during that period using the link which will appear in your registration confirmation.
4. Training Conducted at Customer-Selected Site(s)
In respect of on-site training courses, Customer is responsible for ensuring Customer’s workplace (or nominated training space) is suitable for training, including but not limited to:
(a) Compliance with applicable health and safety requirements
(b) Insurance appropriate for the Customer site where the training is being provided
(c) Any necessary equipment in good working order
(d) Table and seating facilities
(e) Toilet facilities
(f) Lunch area/Tea & Coffee
For Public ILT courses conducted at a venue organized by Caseware, participants attend at their own risk, and Caseware disclaims all liability for the condition of the venue except to the extent caused by Caseware's gross negligence or wilful misconduct. Customer shall indemnify and hold Caseware harmless from any claim, loss, or liability arising from the condition of a Customer-selected site, including any failure by Customer to comply with the requirements set out in this Section 4.
5. Course Content
All courses are conducted in substantial conformity with course descriptions; however, Caseware reserves the right to modify course content whenever necessary.
Caseware makes every effort to ensure the information either contained or derived from this training is error free. Caseware does not warrant the accuracy, completeness, correctness or adequacy of the information in the training other than as required by law. All content is specifically provided for information purposes only and is not deemed as advice. Caseware recommends that Customer obtains appropriate professional advice before using any information contained or provided by this training.
Where a course may be eligible for CPE, it is Customer’s responsibility to confirm that the CPE is applicable in the Customer’s jurisdiction.
Training may be delivered by Caseware employees or approved third‑party contractors.
6. Conduct
All participants are required to conduct themselves in a professional and courteous manner at all times during training. Caseware reserves the right to cancel any training should any participants engage in anti-social behaviour, bullying or any act or omission that is disruptive to the training course.
7. Accessibility and Accommodations
Caseware is committed to providing accessible training experiences. Our Accessibility Policy is available at https://www.caseware.com/legal/accessibility. If you require an accommodation to participate in a Caseware training course, please contact training@caseware.com.
8. Intellectual Property
All training materials and content are confidential and proprietary to Caseware. No intellectual property rights are transferred. Customer may not record, transcribe, reproduce, distribute, or create derivative works without prior written consent. Customer shall ensure that its participants comply with the foregoing restrictions and shall indemnify and hold Caseware harmless from any breach of this Section 8 by a participant. Access to any training is licensed, non-transferable, and for internal use only. All use of the training modules must be in compliance with these terms and conditions. Any use of Caseware software in connection with the training provided hereunder must be in compliance with the applicable MPSA.
9. Confidentiality and Security
(a) Confidential Information. The term "Confidential Information" means all non-public, confidential, material or information relating to a Party which is disclosed or made available to a receiving Party (the "Recipient") by the other Party (the "Discloser") under these Training Terms, either orally or in a tangible form, including but not limited to Customer Data, financial information, business plans, marketing materials and strategies, and any other information regarding the foregoing that the Discloser provides to the Recipient hereunder.
(b) Exclusion. Confidential Information shall not include information that the Recipient can establish: (i) was publicly known and made generally available in the public domain prior to the time of disclosure by the Discloser; (ii) is independently developed by the Recipient without use of or reference to the Discloser's Confidential Information; (iii) is already in the possession of the Recipient at the time of disclosure by the Discloser as shown by the Recipient's files and records immediately prior to the time of disclosure; (iv) is obtained by the Recipient from a third-party lawfully in possession of such information and without a breach of such third-party's obligations of confidentiality; or (v) becomes publicly known and made generally available after disclosure by the Discloser to Recipient through no action or inaction of the Recipient.
(c) Limited Use. The Recipient agrees to use Confidential Information only during the Term and solely for purposes of the performance of its obligations, and exercise of its rights, under these Training Terms. The Recipient's obligations with respect to the Confidential Information shall survive for two (2) years following the expiration or termination of these Training Terms, provided that (a) the Recipient's obligations with respect to any Confidential Information consisting of software or other non-public product information, whether in source or object code form, shall never expire.
(d) Protection. The Recipient hereby agrees to take all steps reasonably necessary to maintain and protect Confidential Information in the strictest confidence and for the benefit of the Discloser. Without limiting the foregoing, the Recipient shall take at least those measures that it takes to protect its own confidential information of a similar nature, but in no case less than reasonable care. The Recipient will not at any time, without the express written permission of the Discloser, disclose the Confidential Information directly or indirectly to any person, except on a "need to know" basis to its and its Affiliates’ respective employees, officers, directors, agents, subcontractors, and/or legal and financial advisors (collectively, the "Representatives"), provided that such Representatives are bound to confidentiality obligations no less protective of the Discloser than this Section 9 and that the Recipient remains responsible for compliance by them with the terms of this Section 9.
(e) Compelled Disclosures. If a Recipient is required by law or in connection with a judicial proceeding or court order, or a governmental authority to make any disclosure that is prohibited or otherwise constrained by this Section, the Recipient will provide the Discloser with prompt written notice of such requirement, where permitted by law, so that the Discloser may seek a protective order or other appropriate relief. Subject to the foregoing sentence, such Recipient may furnish that portion (and only that portion) of the Confidential Information that the Recipient is legally compelled or is otherwise legally required to disclose; provided, however, that the Recipient provides such assistance as the Discloser may reasonably request in obtaining such order or other relief.
(f) Return of Materials. All documents and other tangible objects containing or representing Confidential Information that have been disclosed by the Discloser shall be and remain the property of the Discloser. At any time upon the written request of the Discloser, Recipient shall promptly (a) return to the Discloser and/or (b) securely destroy all Confidential Information, except for any information maintained in connection with any automated electronic backup process of the files of the Recipient. Notwithstanding the foregoing, a Recipient may retain in the offices of its legal advisor a single archival copy of any Confidential Information provided by the Discloser under these Training Terms, which copy shall only be used by the Recipient and its legal advisors in connection with the review and enforcement of its obligations under these Training Terms.
10. Privacy and Security
(a) Privacy. To the extent Caseware collects, uses, stores, handles, discloses, disposes of or otherwise processes Personal Data (collectively, "Processes") in relation to or in connection with these Training Terms, Caseware shall Process Personal Data: (a) as permitted under these Training Terms, the MPSA, or as otherwise agreed upon in writing by the Parties; and (b) in accordance with terms and conditions of Caseware's Data Processing Agreement made available at https://www.caseware.com/legal/data-processing-agreement as updated from time to time.
(b) Security. Each Party will maintain appropriate administrative, physical, and technical safeguards for the protection of the security, confidentiality, and integrity of: (a) in the case of Caseware, the Customer's Confidential Information, including Customer Data, and (b) in the case of Customer, access and use of and to the training courses and Caseware Confidential Information. These safeguards will include measures designed to protect against accidental, unauthorized or unlawful destruction, loss, alteration, disclosure of or access to such information.
11. Client Data
Customer has the sole responsibility for the accuracy, quality, integrity, legality, reliability, appropriateness, and intellectual property ownership or right to use of all data submitted. Caseware’s use of Customer Data shall be in accordance with the MPSA.
In the event these Training Terms are terminated (other than by reason of Customer’s breach), Caseware will continue to allow Customer to access Customer’s data for up to 30 days after termination. Caseware reserves the right to withhold, remove and/or discard Customer data without notice for any breach, including, without limitation, Customer’s non-payment of any fees.
12. Media Consent and Release
Customer[C1] agrees that Caseware may take photographs and film footage of Customer and its participants at training courses and, where applicable, Customer will ensure that it has provided all required notices and collected all applicable consents from participants. Caseware may use the photographs and/or film footage for promotional and/or commercial purposes. Customer shall indemnify and hold Caseware harmless from any claim arising from Customer's failure to provide any required notices or to collect any required consents under this Section 12.
13. AI-Assisted Training Services
Certain training materials, content, or delivery methods made available under these Training Terms may be generated, summarized, or facilitated in whole or in part using artificial intelligence tools ("AI-Assisted Content"). By accessing or using any training services, Customer acknowledges and agrees that:
· Caseware may use AI tools to develop, curate, or deliver training content, including but not limited to course materials, assessments, practice scenarios, and instructional guidance relevant to accounting and financial workflows.
· AI-Assisted Content is provided for training and informational purposes only. It does not constitute professional accounting, tax, legal, or regulatory advice. Customer is solely responsible for independently verifying the accuracy and applicability of any AI-Assisted Content before relying on it in a professional capacity.
· The use of AI tools in connection with these Training Terms, including all applicable limitations of liability, disclaimers of warranties, data handling obligations, and permitted use restrictions, is governed exclusively by the AI usage provisions set forth in the MPSA. In the event of any conflict between these Training Terms and the MPSA with respect to AI usage, the MPSA shall control.
· Customer grants Caseware a non-exclusive, worldwide, royalty-free license to use data submitted by Customer or its participants during training sessions, in anonymized and aggregated form, to develop, train, and improve Caseware's AI tools and models.
14. Disclaimer of Warranties
In addition to the disclaimer of warranties set out in the MPSA, all training courses are provided 'as is' and without guarantees of specific outcomes. Customer assumes all responsibility and entire risk as to the suitability of the training results obtained from use of the products and services, and any decisions made or actions taken based on the information contained in or generated by the products and services.
Customer understands and agrees that results obtained from use of and support received concerning the training:
(a) will not under any circumstances be considered tax, legal or accounting advice and it would be advisable for Customer to obtain such advice from Customer’s lawyer, accountant or tax or other business advisor;
(b) do not relieve Customer of Customer’s responsibility to any third party for the preparation, content, accuracy and review of, or the appropriate tax treatment of, items reflected on its tax returns or financial statements;
(c) do not necessarily abide by the terms and regulations set out by any professional, financial or legal regulatory board in relation to examination of records or financial accounts, the conduct of external and internal audits, business analysis, asset management including but not limited to the various methods of corporate and international reporting;
(d) are only intended to supplement the knowledge of accounting, tax and other business professionals regarding tax planning, compliance and related business matters; and
(e) are not meant to replace sound professional judgment or individualised attention of such professionals or client circumstances.
CUSTOMER ACKNOWLEDGES AND UNDERSTANDS THAT THE CASEWARE OFFERINGS, TRAINING COURSES, OR ANY USE THEREOF, INCLUDING ANY AI-ASSISTED CONTENT, ARE INTENDED AS A TOOL TO ASSIST THE CUSTOMER, IN PERFORMING THEIR PROFESSIONAL SERVICES AND ARE IN NO WAY INTENDED TO REPLACE THE ROLE OF ANY PROFESSIONAL FINANCIAL, ACCOUNTING, AUDITING AND/OR LEGAL ADVICE. CUSTOMER REMAINS SOLELY RESPONSIBLE FOR ALL PROFESSIONAL JUDGMENTS, DECISIONS, AND ADVICE PROVIDED TO ITS CLIENTS OR STAKEHOLDERS.
15. Limitation of Liability
To the maximum extent permitted by Applicable Law, in no event will Caseware be liable for loss of or damage to data, lost revenue, lost profits, lost savings, damage to reputation, business interruption, downtime costs or any indirect, incidental, consequential, special, punitive, exemplary or any similar type of damages arising out of or in any way related to these Training Terms under any theory of liability, whether in contract, tort (including negligence), indemnity, strict liability or otherwise, even if advised of the possibility of such damages or such losses were otherwise foreseeable.
In no event shall Caseware's total liability to Customer for all claims arising out of or as a result of these Training Terms under any theory of liability, whether in contract, tort (including negligence), indemnity, strict liability or otherwise, exceed the total amount of fees paid by Customer to Caseware for the applicable training course in the twelve (12) month period preceding the claim or action.
16. Indemnification
(a) Customer acknowledges that all training services, including any AI-Assisted Content, are provided solely for educational and skills development purposes.
(b) Customer’s indemnification obligations under the MPSA expressly extend to any claim, loss, or liability arising from Customer’s application or misapplication of training content in a live professional, regulatory, or client-facing accounting context.
(c) To the extent Customer or its end users submit data, scenarios, or financial information into any training environment or AI-assisted training tool, Customer shall indemnify and hold Caseware harmless from any third-party claims arising from such submissions, including claims relating to confidentiality, data ownership, or regulatory compliance obligations.
(d) Caseware shall have no indemnification obligation to Customer for losses arising directly from Customer’s reliance on AI-Assisted Content as a substitute for qualified professional judgment, licensed software output, or authoritative regulatory guidance.
(e) Customer shall indemnify Caseware against any claim brought by a regulator, third party, or Customer’s own end users arising from the use of training outputs (including AI-generated assessments or practice materials) in any manner inconsistent with applicable professional standards.
17. Miscellaneous
a. Notice. All notices and other information to be given by one of the Parties to the other shall be given by hand delivery or e-mail to the other Party. For Caseware, all notices should be sent to the Customer's account representative, with a copy of such notice to legal@caseware.com. For Customer, all notices will be sent to the mailing and/or email address Customer provides to Caseware for the Order Form. Notices sent by e-mail shall be deemed to have been received by the Party to whom it was addressed on the date of transmission or receipt, or if sent on a day that is not a business day or after normal business hours, on the first business day following transmission or receipt. Notices sent by hand delivery shall be deemed to have been received on the date of delivery. Any notice of change of address by a Party shall be effective only upon receipt of a notice provided to the other Party in accordance with the provisions of this section.
b. Entire Agreement. These Training Terms, together with the MPSA and any other documents incorporated herein by reference, constitute the sole and entire agreement of the Parties with respect to the subject matter of these Training Terms. Except where the Parties enter into a written agreement expressly stating that said written agreement supersedes all other agreements (including these Training Terms), these Training Terms supersede all prior and contemporaneous understandings, agreements, and representations and warranties, both written and oral, with respect to such subject matter, including any proposals, price quotes, purchase orders, click-wrap agreements, or non-disclosure agreements. In the event of any conflict or inconsistency among the following documents, the order of precedence shall be (1) the applicable Order Form, (2) these Training Terms, and (3) the MPSA.
c. Relationship. The Parties agree that Caseware and Customer are independent entities, and that no other relationship is intended, including but not limited to a partnership, joint venture or agency relationship. Neither Party will have the authority or right to represent nor obligate the other Party in any way except as expressly authorized by these Training Terms.
d. Governing Law and Choice of Forum. These Training Terms shall be governed by and construed and enforced in accordance with the laws of the jurisdiction set out in the table below, unless otherwise specified in the applicable Order Form and the Parties hereto submit to the exclusive jurisdiction of the courts of such jurisdiction. Where the Order Form does not set out a specific jurisdiction, these Training Terms shall be governed by and construed and enforced in accordance with the laws in force in the Province of Ontario and the federal laws of Canada applicable therein and the Parties hereto agree to submit to the exclusive jurisdiction of the courts of the Province of Ontario.
Caseware Affiliate Identified on the Order Form - Governing Law and Choice of Forum:
Caseware International Inc. - Province of Ontario, Canada
Caseware USA Inc. - State of New York, U.S.A.
Caseware Nederland B.V. - Netherlands
Caseware UK Limited - England and Wales
Caseware Germany GmbH - Germany
Caseware Australia Pty Ltd. - Australia
e. Equitable Relief. Each Party acknowledges and agrees that a breach or threatened breach by such Party of any of its obligations under Section 9 or, in the case of Customer, Section 8, would cause the other Party irreparable harm for which monetary damages would not be an adequate remedy and agrees that, in the event of such breach or threatened breach, the other Party will be entitled to equitable relief, including a restraining order, an injunction, specific performance, and any other relief that may be available from any court, without any requirement to post a bond or other security, or to prove actual damages or that monetary damages are not an adequate remedy. Such remedies are not exclusive and are in addition to all other remedies that may be available at law, in equity or otherwise.
f. Waiver. The waiver by either Party of a breach or default of any provision of these Training Terms by the other Party shall not be effective unless in writing and shall not be construed as a waiver of any succeeding breach of the same or of any other provision. Nor shall any delay or omission on the part of either Party to exercise or avail itself of any right, power or privilege by such Party shall constitute a waiver.
g. Assignment. Customer may not assign these Training Terms or any of its rights or obligations in relation thereto, in whole or in part, without the prior written consent of Caseware.
h. Force Majeure. Except for payment obligations, neither Party shall be liable for any delay or failure to perform its obligations in these Training Terms attributable to circumstances beyond its reasonable control, such as acts of God, fire, pandemic, natural disaster, terrorism, labour stoppage, Internet service provider or system failures or delays, civil unrest, war or military hostilities, or criminal acts of third-parties (each a "Force Majeure Event"). Any Party claiming a Force Majeure Event shall use reasonable diligence to remove the condition that prevents performance and shall not be entitled to suspend the performance of its obligations in any greater scope or for any longer duration than is required by the Force Majeure Event. Each Party shall use its commercially reasonable efforts to mitigate the effects of such Force Majeure Event, remedy its inability to perform, and resume full performance of its obligations hereunder, provided, however, that in the event the Force Majeure Event continues for thirty (30) days after the date of the occurrence, and such failure to perform would constitute a material breach of these Training Terms in the absence of such force majeure, either Party may terminate any training course by written notice to the other Party and in accordance with Section 11.2 of the MPSA.
i. Severability. Wherever possible, each provision of these Training Terms may be interpreted in such a manner as to be effective and valid under Applicable Law, but if any provision of these Training Terms is held to be prohibited or invalid under Applicable Law, such provision will be ineffective only to the extent of such prohibition or invalidity, without invalidating the remainder of such provision or the remaining provisions of these Training Terms.
j. Anti-Corruption. Neither Party has received or been offered any illegal or improper bribe, kickback, payment, gift, or thing of value from an employee or agent of the other Party in connection with these Training Terms. Reasonable gifts and entertainment provided in the ordinary course of business do not violate the above restriction.
k. Export Controls. These Training Terms are expressly made subject to any laws, regulations, orders, or other restrictions on export from Canada or the United States of America (U.S.) of the Caseware Offerings, or any information about any of them, which may be imposed from time to time by the governments of Canada or the U.S. Customer shall not export the Caseware Offerings, or any information about any of them without the prior written consent of Caseware and compliance with such laws, regulations, orders, and other restrictions. Customer represents and warrants that (a) it is not located in a country that is subject to a Canadian or U.S. government embargo, or that has been designated by the Canadian or U.S. government as a "terrorist supporting" country; and (b) it is not listed on any Canadian or U.S. government list of prohibited or restricted parties.
l. Modifications. Caseware may update these Training Terms from time to time in its sole discretion.
m. Language. These Training Terms may be translated into other languages for Customer convenience. In the event of any conflict or inconsistency between the English version and any translated version, the English language version shall prevail.
n. Survival. In addition to Section 9(c) (Confidentiality), Sections 8 (Intellectual Property), 14 (Disclaimer of Warranties), 15 (Limitation of Liability), and 16 (Indemnification) shall survive the expiration or termination of these Training Terms.
Application and Interface Security
Our Software Development Life Cycle (SDLC) ensures that our applications and programming interfaces (APIs) are designed, deployed, and tested in accordance with leading industry standards – such as OWASP, ISO, and SOC – and adhere to legal, statutory, or regulatory compliance obligations.
You will be onboarded once all agreements and policies are accepted for usage of the service. You are responsible for ensuring your usage of Caseware Cloud is in compliance with applicable laws and regulations.
Legal specifics can be found in the Cloud Services Agreement here.
Our policies and procedures have been established and are maintained in support of data security to include confidentiality, integrity, and availability across multiple system interfaces, jurisdictions, and business functions to prevent improper disclosure, alteration, or destruction.
Audit Assurance and Compliance
Independent audits are conducted by registered 3rd parties as part of our compliance program for ISO 27001 and SOC 2 for our Cloud services. We also have an internal audit program, external penetration testing and regularly scheduled internal vulnerability testing. Vulnerability test results are shared with customers as outlined in the Client Initiated Testing Policy. The results of these processes are tracked through our improvements process. The methodology and tools used to conduct penetration testing is tailored to each assessment for specific targets and attacker profiles. SOC 2 reports are provided under NDA to clients. Our SOC 3 Report is available in PDF format here.
Production data is stored on Amazon Web Services (AWS). The application handles logical separation of client data through database isolation. Data that is transferred to and from our service (including backups) is 100% encrypted over an SSL connection (AES-256-bit – the same strength used in online banking). Data transmission occurs between client and server, and databases. Controls are in place for secure and encrypted bulk data transfers. There are no email transmissions. For more information on security, see: https://www.casewarecloud.com/security.html. Our legal team monitors our regulatory obligations. Please refer to our Cloud Services agreement for legal requirements here.
Business Continuity Management and Operational Resilience
Caseware has a consistent unified framework for business continuity planning and has established, documented, and adopted this to ensure all business continuity plans are consistent in addressing priorities for testing, maintenance, and information security requirements.
Requirements for business continuity plans include the following:
- Defined purpose and scope, aligned with relevant dependencies
- Accessible to and understood by those who will use them
- Owned by a named person(s) who is responsible for their review, update, and approval
- Defined lines of communication, roles, and responsibilities
- Detailed recovery procedures, manual work-around, and reference information
- Method for plan invocation
Our business continuity and security incident response plans are tested at planned intervals or upon significant organizational or environmental changes. Incident response plans involve impacted customers (tenant) and other business relationships that represent critical intra-supply chain business process dependencies.
Our service is hosted on Amazon’s AWS and utilities services and environmental conditions (for example, water, power, temperature and humidity controls, telecommunications, and internet connectivity) are secured, monitored, maintained, and tested for continual effectiveness at planned intervals to ensure protection from unauthorized interception or damage, and are designed with automated failover or other redundancies in the event of planned or unplanned disruptions.
Our cloud service is completely virtual and hosted on Amazon Web Services (AWS). Amazon is also ISO and SOC2 compliant and responsible for restricting access to facilities housing the productions systems to authorized individuals. AWS is also responsible for environmental protection and preventative maintenance over production systems. AWS has published further details here: https://aws.amazon.com/compliance/data-center/controls. These certifications address physical security, system availability, network and IP backbone access, customer provisioning and problem management. Physical access and environmental controls are managed and controlled by AWS. AWS physical protection assurance information can be found at: https://aws.amazon.com/compliance.
Caseware has aligned our security program to ISO 27001 and we have business continuity processes in place to address disruptions to critical services. We monitor all cloud instances for performance and availability and incorporate the following:
- Identify critical products and services
- Identify all dependencies, including processes, applications, business partners, and third party service providers
- Understand threats to critical products and services
- Determine impacts resulting from planned or unplanned disruptions and how these vary over time
- Establish the maximum tolerable period for disruption
- Establish priorities for recovery
- Establish recovery time objectives for resumption of critical products and services within their maximum tolerable period of disruption
- Estimate the resources required for resumption
Customers can see our real-time operational status at our status page here: https://caseware.statuspage.io/.
We maintain a central system for documentation and train all staff on processes. Procedures include change management, security processes, roles and responsibilities of internal users. Our procedures are updated on an as needed basis and revision histories are logged. Additionally, policies and procedures shall include defined roles and responsibilities supported by regular workforce training.
Caseware maintains a records and retention policy for Cloud services. The retention policy is not client-specific. Backup and recovery procedures are documented and automated alerts are sent daily to operations staff. Backup and recovery measures have been incorporated into business continuity planning and tested accordingly for effectiveness. See the retention policy for each category of records below.
System transaction logs
Description: Database journals and other logs used for database recovery.
Retention period: 30 days.
Reason for retention: Based on backup and recovery strategy.
Allowable storage media: Electronic.
Audit logs
Description: Security logs, for example, records of logon/logoff and permission changes.
Retention period: 30 days.
Reason for retention: Maximum period of delay before forensic investigation.
Allowable storage media: Electronic.
Operational procedures
Description: Records associated with the completion of operational procedures.
Retention period: 2 years.
Reason for retention: Maximum period elapsed regarding dispute.
Allowable storage media: Electronic.
Customer
Description: Customer backups.
Retention period: 90 days.
Reason for retention: Data protection requirement.
Allowable storage media: Electronic.
Change Control and Configuration Management
Change management controls have been established for any new development and/or acquisition of new data, physical or virtual applications, infrastructure network and systems components, or any corporate, operations and/or data center facilities have been pre-authorized by the organization’s business leadership or other accountable business role or function. Our SDLC has a defined quality change control and testing process with established baselines, testing, and release standards which focus on system availability, confidentiality and integrity of systems and services.
Policies and procedures have been established, and supporting business processes and technical measures implemented, to restrict the installation of unauthorized software on organizationally-owned or managed user end-point devices and IT infrastructure network and systems components within the production cloud environment. Our change management policies and procedures include managing the risks associated with applying changes to business-critical or customer impacting applications and system-system interface (API) designs and configurations. Technical measures have also been implemented to provide assurance that all changes directly correspond to a registered change request, business-critical or customer, and/or authorization by, the customer as per agreement prior to deployment.
Data Security and Information Lifecycle Management
Caseware has policies and procedures and supporting business processes and technical measures in place to inventory and maintain data flows within the SaaS network and systems for each geographic location. Controls are in place to ensure that data is placed in the geographic area determined by the client. Subscriber data within the production cloud environment resides on two-tier architecture and is not directly accessible from the internet.
Our security policy defines four levels of data classification: confidential, restricted, operational, and public. All data stored within the production cloud infrastructure is considered confidential, which is our highest level of security and only authorized staff have access to this environment. Logical access to the production cloud environment is restricted to the operations team alone.
All subscriber data is stored in the production cloud environment. Use of customer data in non-production environments is controlled through secure data-handling processes, which require explicitly documented approval from the customers whose data is affected, and must comply with legal and regulatory requirements for scrubbing of sensitive data elements.
There is a designated operations team responsible for all operational functions regarding the infrastructure and storage with assigned responsibilities that have been defined, documented, and communicated.
Caseware Cloud is hosted on Amazon web servers around the world. Upon subscribing to the Caseware Cloud Services, CWC informs clients of the jurisdiction in which the server that has been allocated to host your Subscriber Data and Personal Information is located. You may consent to such allocation, or refuse a server so allocated.
For performance reasons, we’ll typically set you up in:
- United States/North Virginia if you’re located in the United States or South America
- Canada/Montreal if you’re located in Canada
- Australia/New South Wales if you’re located in the Asia-Pacific region
- Ireland/Leinster if you’re located in any other region
Data center Security
The production infrastructure is completely hosted within Amazon’s AWS. AWS is responsible for restricting access to facilities housing the production systems to authorized individuals. AWS is also responsible for environmental protection and preventative maintenance over production systems. Physical access is controlled by AWS at the perimeter and at building ingress points. Full details can be found here: https://aws.amazon.com/whitepapers/#security. AWS has published further details here: https://aws.amazon.com/compliance/data-center/controls/.
Our production infrastructure is completely hosted within Amazon’s AWS. AWS has SOC 2 reports, which are reviewed annually. AWS governance processes can be found here: https://aws.amazon.com/compliance/.
Encryption and Key Management
Our cryptography policies and procedures are designed to support business process. Technical measures have been implemented based on business requirements for protection of data at rest and data in transit as per applicable legal, statutory, and regulatory compliance obligations.
Our cryptography policy requires all encryption keys to have identifiable owners within the organization. The cryptographic key lifecycle management ensures access controls are in place for secure key generation, exchange and storage, including segregation of keys used for encrypted data or sessions.
Data stored at the server level (data-at-rest) is encrypted using the industry standard AES-256 algorithm. Data that is transferred to and from our service (data-in-transit) is encrypted via TLS with ephemeral key exchange and use industry-accepted strong cipher suites. Certificates use a minimum of 2048-bit key strength with SHA-2 or stronger signature algorithm. Private keys are generated and stored in our secrets management systems. They are deployed and used on production systems as needed via our change control process. Certificates are obtained through a reputable vendor and follow the built-in and industry standard renewal/rotation process based on expiry or revocation as needed.
Governance and Risk Management
Security risk assessments are completed at least annually and consider the following:
- Awareness of where sensitive data is stored and transmitted across applications, databases, servers, and network infrastructure
- Compliance with defined retention periods
- Data classification and protection from unauthorized use, access, loss, destruction, and falsification
We have implemented an Information Security Management System based on ISO 27001 and SOC 2 controls. Our ISMS includes the following areas insofar as they relate to the characteristics of the business:
- Information Security Policy (this document)
- Access Control Policy
- Availability Management
- Clean Desk Policy
- Cryptography Policy
- IS Supplier Management Policy
- Logging and Monitoring Policy
- Mobile Device Policy
- Network Security Policy
- Password Management Policy
- Patch Management Policy
- Software Policy
- Technical Vulnerability Management Policy
- Risk Assessment Methodology
- Malware, Email and ISMS Policy
- Internet Acceptable Use Policy
- Penetration Testing Policy
- Teleworking Policy
- Records Retention and Protection
Department managers are responsible for maintaining awareness of, and complying with, security policies, procedures, and standards that are relevant to their area of responsibility.
Risk acceptance levels have been defined within the risk management methodology and all risks are mitigated to an acceptable level with reasonable resolution time frames and stakeholder approval.
Our information security policies and procedures are posted and available for review by all impacted staff and external business relationships. The Information Security Steering Committee is responsible for developing, maintaining, and enforcing our service’s information security policies. The information security policy is reviewed annually and approved by the Information Security Steering Committee. Executive and line management provide support for information security through clearly documented direction and commitment, and shall ensure action has been assigned. There is a senior member of management who is responsible for information security governance and operations, including protection of customer data – this role reports to the CFO.
Policy reviews are conducted annually by the Information Security Steering Committee or as a result of changes to the organization to ensure its continuing alignment with the security strategy, effectiveness, accuracy, relevance, and applicability to legal, statutory, or regulatory compliance obligations.
Formal risk assessments are performed annually and in conjunction with any changes to information systems to determine the likelihood and impact of all identified risks. The likelihood and impact associated with inherent and residual risk is determined independently, considering all risk categories based on audit results, threat and vulnerability analysis, and regulatory compliance. Risk assessment results can include updates to security policies, procedures, standards, and controls to ensure that they remain relevant and effective. The results of risk assessments are:
- Reported to senior management who then partake in a risk treatment process
- Updated in a risk register
- Prioritized based on possible impact to production systems
Our HR has a defined screening process for all staff. Reference checks are obtained with respect to all employees at time of hiring, with criminal and credit background checks for those who perform operational roles with the product cloud environment. All staff are required to sign a confidentiality agreement prior to employment to ensure protection of client information for the protection of data. Information security awareness training is provided during employee onboarding. Specific training is provided for developers on secure coding practices. Formal records are maintained for completion of internal staff training. Employee terminations and position changes are initiated by department managers. Our HR team reviews these requests and submits the request through our ticketing system for de-provisioning and provisioning requirements. Our HR team has an employee departure process to ensure all equipment is returned and accounts terminated to ensure that access to production environments is removed.
A security awareness training program has been established for all contractors, third-party users, and employees and is mandated. All individuals with access to confidential and restricted data receive appropriate awareness training and regular updates in organizational procedures, processes, and policies relating to their job function relative to the organization. Roles and responsibilities of contractors, employees, and third-party users are documented as they relate to information assets and security.
User responsibilities are defined within job descriptions for all staff and they are made aware of their roles and responsibilities for:
- Maintaining awareness and compliance with established policies and procedures and applicable legal, statutory, or regulatory compliance obligations
- Maintaining a safe and secure working environment
- Report any suspicious activity if detected
We have a clear screen policy which requires that unattended workspaces do not have openly visible sensitive documents and user computing sessions had been disabled after an established period of inactivity.
We have an Access Control policy in place that specifies how to manage access control to all system components and sensitive information in the organization. Policies governing acceptable use or access to subscriber data and metadata is included in the Caseware privacy policy (https://www.caseware.com/privacy-statement/). Caseware collects, uses and discloses information only for the following purposes:
- To verify your identity
- To provide you with the Caseware Cloud Services
- To contact you for the purposes of product information, service updates, billing notifications, or notifications relating to the Caseware Cloud Services
- To monitor and/or improve system usage, server and software performance
- To assist with technical support issues
- To comply with any laws, regulations, court orders, subpoenas or other legal process of investigation and to protect CWC, its Affiliates and other individuals from harm
- To improve and enhance CWC Service offerings
Identity and Access Management
Policies and procedures have been established to store and manage identity information about every person who accesses the production cloud infrastructure and to determine their level of access. Access control policies and procedures have been established, and supporting business processes and technical measures implemented, for restricting user access as per defined segregation of duties to address business risks associated with a user-role conflict of interest. The access control repository is managed by the provider. We use a privileged identity manager and password management system.
Access to, and use of, audit tools that interact with production cloud environment is segmented and restricted to prevent compromise and misuse of log data. User access to diagnostic and configuration ports are restricted to authorized individuals and applications.
Controls are in place to ensure only approved software is installed within the production cloud infrastructure.
Access to the organization’s own developed applications, program, or object source code, or any other form of intellectual property (IP), and use of proprietary software is controlled following the rule of least privilege based on job function as per established user access policies and procedures.
Caseware Cloud Service requires password authentication to access the base system. Once in the system, users must be assigned security roles to perform additional operations and access certain content. With security roles, you can control who has access to what content. Your organization is responsible for developing appropriate security policies around passwords and security roles using the security features provided in Caseware Cloud. Caseware provides access to clients, who then control their own users and administrative accounts, including provisioning and de-provisioning. Two-factor authentication is employed. User access is authorized and revalidated quarterly, to ensure the rule of least privilege based on job function. For identified access violations, remediation activities are followed based on the established user access policies and procedures. Timely de-provisioning (revocation or modification) of user access to data or managed applications, infrastructure systems, and network components, has been implemented as per established policies and procedures and based on user’s change in status such as termination of employment or other business relationship, job change, or transfer. The provider manages service account provisioning and de-provisioning. Service account authentication utilizes multi-factor authentication.
Infrastructure and Virtualization Security
Caseware Cloud deploys a SaaS-based endpoint detection and response security endpoint to all hosts within our infrastructure. All user, process, and network activity is collected and stored in the tamper-proof central location and analyzed in near real-time for suspicious behaviors as well as for manual forensics. Protection, retention, and lifecycle management of audit logs, adhere to applicable legal, statutory, or regulatory compliance obligations and provide unique user access accountability to detect potentially suspicious network behaviors and/or file integrity anomalies, that are required to support forensic investigative capabilities in the event of a security breach. Our tools have the capability to detect/prevent unauthorized or anomalous behavior based on network traffic or host activity. All authentication events, successful and failed, are logged.
Our production and non-production environments are separated to prevent unauthorized access or changes to information assets. Separation of the environments include logical separation and segregation of duties for personnel accessing these environments as part of their job duties.
Our production system and network environment is protected by centrally managed firewalls and ensures separation of production and non-production environments. Our production environment is designed, developed, deployed, and configured to ensure our operations team and clients user access is appropriately segmented from other client users, based on the following considerations:
- Established policies and procedures
- Isolation of business critical assets and/or sensitive user data and sessions that mandate stronger internal controls and high levels of assurance
- Compliance with legal, statutory, and regulatory compliance obligations
The production cloud infrastructure has a reliable and mutually agreed upon external time source that is used to synchronize the system clocks of all relevant information processing systems to facilitate tracing and reconstitution of activity timelines.
Supply Chain Management, Transparency, and Accountability
Policies and procedures have been implemented to ensure the consistent review of service agreements between providers and customers across the relevant supply chain. Reviews performed at least annually and identify non-conformance to established agreements. Any non-conformances are identified as actions to address service-level conflicts or inconsistencies.
Threat and Vulnerability Management
Policies and procedures have been established, and supporting business processes and technical measures implemented, to prevent the execution of malware within the production cloud environment or end user devices and IT infrastructure network and system components. Policies and procedures have been established, and supporting processes and technical measures implemented, for timely detection of vulnerabilities within organizationally-owned or managed applications, infrastructure network and system components. We also perform ongoing application and code vulnerability evaluations of our products and have dual peer reviews of all code changes to ensure the efficiency of implemented security controls. Our risk management methodology is used for prioritizing remediation of identified vulnerabilities. Changes are managed through our defined change management process for all vendor-supplied patches, configuration changes, or changes to our applications. Our anti-malware solution is centrally managed and runs on all systems. The anti-malware solution includes mechanisms for detecting or preventing phishing. Malware signature updates are deployed within 1 day of release.